APR IC100012 Front Mount Intercooler Kit Audi and VW
The APR IC100012 Intercooler System is a OEM-location upgrade that dramatically reduces intake air temperature (IAT), minimizes heat soak, and provides increased performance! The APR intercooler improves cooling by up to 39 degrees F in demanding situations! The system is a direct bolt-on upgrade that requires no trimming and is recommended at every stage of performance.
Benefits of the APR IC100012 Intercooler:
Dramatically lowers intake air temperature Increases horsepower while minimizing power-robbing heat soak.
Intercooler installed in the best location for this platform The APR intercooler utilizes factory air dams for exceptional airflow across the core.
Use of the OEM-location allows for a massive intercooler core 40% larger than the OEM intercooler.
Highly effective core design Bar-and-plate core with staggered and louvered fins.
Smooth cast aluminum end tanks Engineered for low turbulence/restriction and maximum flow.
Silicone inlet and outlet hoses Multi-ply reinforced silicone design, fluorosilicone internal layer and EZ-Flow stepped design.
No hidden labor costs or permanent modifications No trimming, cutting, or other modification required.
APR IC100012 Intercooler Design:
The APR Intercooler core is a large bar-and-plate design featuring densely packed staggered and louvered fins. This design offers exceptional cooling while balancing pressure loss across the core, and maintaining critical airflow to the components behind the intercooler system.
APRs Engineers paid close attention to the balance between core effectiveness and pressure drop through the core, core style and fin density. With fin density too low, pressure drop decreases dramatically, but typically results in a core incapable of effectively cooling. Likewise, with fin density too great, pressure drop increases dramatically, resulting in the turbocharger working harder, and hotter, to produce the same level of airflow. APRs Engineers were able to maximize performance by fine tuning this often unseen balancing act.
To fully utilize the massive core, APRs mechanical engineers designed cast aluminum end tanks organically shaped for proper airflow distribution across the entire core. The one-piece end tanks are CNC machined to provide a slip resistant mounting surface for hoses, precise integrated mounting surfaces, and perfectly flat connecting surfaces used for TIG welding the tanks to the core.
APR IC100012 Intercooler Vehicle Fitment:
*TT Valvelift engines will require OEM 2.0 TSI Discharger Pipe: 1K0 145 840 R and 1K0 145 769.
APR IC100012 Intercooler Manufacturing: The APR Intercooler core is a large bar-and-plate design featuring densely packed staggered and louvered fins, cast aluminum end tanks are CNC finish machined before TIG welding the tanks to the core. The Silicone hoses are reinforced and lined with a protective fluorosilicone internal layer.
APR IC100012 Intercooler Install: Installation of the APR intercooler takes about 4-6 hours. Basic hand tools and a Torx bit set are needed, installation involves removal of the bumper and headlights. APR IC100012 Install instructions
APR products are warranted to be free from defects in the materials and workmanship prior to installation. This warranty does not cover labor, misuse, faulty installation, failure of related parts or parts purchased other than from APR, LLC. This warranty extends to the original purchaser for as long as they own the vehicle and the APR product.