AWE Tuning

AWE Tuning 2660-13040 S-FLO Carbon Intake Kit Porsche 991 Turbo

$2,205.26 $2,095.00
You save: $110.26
Ships free inside CONUS:
Authorized distributor:

Current stock: 0

The AWE Tuning Porsche 991 Turbo and Turbo S S-FLO Carbon Intake was engineered in-house to draw in large volumes of cool air to produce impressive power gains of 22 HP and 22 Lb-Ft on a stage 1 tuned engine.

The engine bay temperature of the 991 Turbo rapidly rises under full throttle acceleration. Without the insulation of the carbon fiber S=FLO airbox, the engine would be ingesting air almost 10 degrees hotter. Hotter air hurts power output

The carbon fiber airbox insulating effects of the AWE S-FLO intake, along with its superior aerodynamics and higher capacity filters, results in peak power gains of 6 HP and 17 TQ and maximum power gains of 22 HP and 22 TQ.

AWE Tuning 2660-13040 Intake Highlights:

  • UV stabilized resin and clear coat prevent yellowing from heat
  • Max gains of 22 hp and 22 ft-lbs of torque at the crank
  • Fully sealed carbon fiber airbox and filter combination
  • Designed, engineered and tested in house at AWE Tuning
  • Perfect integration with OEM inlet ducting
  • No Check Engine Light - Guaranteed
  • Utilizes stock mounting locations
  • Filters are durable, and washable
  • Perfect Fitment - Guaranteed

The AW S-FLO makes for a more aggressive intake note than stock, with a distinctive AWE Tuning sound. The AWE Tuning S-FLO Filters (included in the kit) increase the air filter surface area by 22%.

AWE Tuning 2660-13040 Vehicle Fitment:
The AWE Porsche 991 Turbo intake is designed to fit the following vehicles.

  • 2014 Porsche 991 Turbo
  • 2015 Porsche 991 Turbo
  • 2016 Porsche 991 Turbo
  • 2014 Porsche 991 Turbo S
  • 2015 Porsche 991 Turbo S
  • 2016 Porsche 991 Turbo S

AWE 991 Carbon Intake Manufacturing:
Fitment is guaranteed, airbox geometry is 3D scanned and optimized, and mating to the factory air inlet pipes is perfect. The 100% carbon fiber AWE Tuning Porsche 991 Turbo and Turbo S S-FLO Carbon Intake is crafted from high grade 2x2 carbon fiber and boasts UV stabilized clear coat to prevent yellowing from under hood heat. The dual S-FLO Filters were specifically designed to maximize airflow in the AWE Tuning ������ S-FLO Carbon Intake. The cleverly engineered S-FLO Filters increase surface area, resulting in increased air flow to deliver the coolest possible air to your engine.

AWE 991 Turbo CAI Install:
Installation of the AWE Intake typically takes about 4 hours, complete instructions are included. Instructions are available online Here:. professional installation recommended. Install requires removal of the rear wheels, fender liners, tail lights and bumper. Please observe all safety precautions and follow proper installation guidelines while working on your vehicle.

AWE Airbox Warranty:
AWE Intakes are warranted to be free from defects in the materials and workmanship prior to installation. This warranty does not cover labor, misuse, faulty installation, failure of related parts or parts purchased other than from AWE, LLC.

This product ships directly from AWE in PA
all engine

Product Reviews

We would love to hear your feedback on this product