BBS CHR 139 NE 18x8.5" ET47 Wheel

Ships free inside CONUS:
Authorized distributor:

Current stock: 0

BBS has been engineering true high performance wheels for more than 40 years. Over those years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications.

BBS CHR wheels are an iconic and timeless design. The CHR 139 NE is a seven spoke mesh design. The wheel features the Nurburgring Edition finish with a Black base and red lettering with a replaceable red painted stainless steel rim protector. The CHR wheels are from the BBS Performance Line which feature flow formed barrels to bridge the gap between a fully forged wheel and a low pressure cast wheel. They have been designed to optimize the stiffness to weight ratio while providing the safety and long term durability expected from BBS.


  • One Piece Counter Pressure Cast Wheel with Flow-formed Rim
  • Black Paint with Red Lettering and Red Rim Protector
  • Weight optimized by FEM analysis
  • Tested to VIA and TUV standards
  • TPMS compatible


  • Diameter: 18"
  • Width: 8.5"
  • Offset: ET47
  • Bolt Pattern: 5x112
  • Weight: 10.39 Kg (22.9 Lbs) +/- .5 Kg

The BBS CHR 139 NE wheel in 18x8.5" ET47 fits the following vehicles:

Under normal & reasonable use, BBS wheels are warranted against structural manufacturing defects for 10 years. This warranty is void if wheel shows signs of impact damage or if application is not approved by BBS of America as outlined in the published BBS Application Guide. Also void if wheel is altered in any way including, but not limited to: disassembly of multi-piece wheels by anyone other than BBS, powder coating, chroming, polishing, machining, or drilling. Warranty is also void if a PFS (centering ring system) wheel is used without correct PFS hardware. BBS wheels are warrantied against manufacturing finish defects for 2 years from date of purchase. This warranty is void if finish deterioration is caused by outside influence including wheel cleaners & chemicals, impact damage including stone or road debris, neglect, improper balance weights, improper mounting, repairs or any other influence at the sole discretion of BBS of America. BBS only recommends the use of mild soap and water on a cool wheel.
CHR 139 NE
18 inch diameter
all wheels
Free Shipping:
free shipping inside CONUS

Product Reviews

We would love to hear your feedback on this product