Since 1978, Hartmann Wheels has focused on bringing the highest quality wheels to the US market. Hartmann wheels are designed by Germany's finest engineers and produced in a modern, state-of-the-art German owned foundry. Hartmann utilizes a low pressure casting process which produces a high performance wheel equal in strength and finish quality to OEM Audi and VW wheels. The wheels are heat treated for increased strength and are tested to JWL, VIA, and TUV standards.
The Hartmann HRS6-091-MA wheel is a OEM-inspired split 5-spoke design with geometric spokes that run parallel to the face and then angle down towards the centercap. The HRS6-091-MA wheels are finished with an anthracite paint with a protective matte clearcoat. The HRS6-091-MA is designed to accept OEM lug bolts, OEM centercaps, and OEM TPMS senders.
Hartmann carefully selects their wheel offsets "ET"* to provide a fitment which will clear the brake caliper and suspension components, widen the track for better handling and aesthetics, and not allow the tire to contact the fender or fender liner during cornering or suspension travel, even on lowered vehicles. Fitment is backed by a money back guarantee. *ET: from German "Einpresstiefe" (translates into "Insertion Depth") referred to as "Offset" in English: A measurement in mm of the distance between the center line of the rim wheel and the mounting surface of the wheel which contacts the hub face.
HARTMANN HRS6-091-MA FEATURES:
Matte Anthracite Finish
OE quality and strength
Uses OEM R13 ball seat lug bolts
Accepts OEM centercaps
Low pressure cast aluminum alloy
Heat treated for high strength
Tested to JWL, VIA, and TUV standards
HARTMANN HRS6-091-MA SPECIFICATIONS:
Bolt Pattern: 5x112
Centerbore: 66.56 mm
Centerbore Chamfer: 3 mm
Lug Type: 14x1.5 R13 Ball Seat
Centercap Audi: 4B0 601 170 A 7ZJ
Centercap VW: 3B7 601 171 XRW
Load Rating: 720 Kg (1,584 Lbs)
Weight: 11.07 Kg (24.4 Lbs) +/- .5 Kg
FITMENT GUIDE: The Hartmann HRS6-091-MA wheel in 18x8.0" ET32 fits the following vehicles: