SuperPro TRC12265 Front Sway Bar Links Audi and Volkswagen
You save: $12.22
The SuperPro TRC12265 Adjustable Front Sway Bar Links allow the sway bar to be set with zero preload. A sway bar ideally should have zero preload at ride height with driver weight in the seat, this ensures that the springs maintain their intended spring rate. During cornering the swaybar can then perform it's function of lateral load transfer as intended. Optimal use of adjustable sway bar links will come in combination of an adjustable height coilover suspension with a "corner balancing" procedure during suspension alignment. The TRC12265 links are adjustable from 320 mm to 365 mm in length.
SuperPro TRC12265 Links Vehicle Fitment:
SuperPro Sway Bar Links Manufacturing: SuperPro sway bar links feature an aluminum center section with sealed ball joints on both ends.
SuperPro Sway Bar Endlinks Install: Installation of the SuperPro links should be done with the vehicle at ride height on level ground with drivers weight in the seat. This is best done at the time of corner balancing the vehicle.
All SuperPro Suspension Bushings, Sway Bars and Suspension Arms are covered by a Lifetime Warranty to the original purchaser and includes off-road, track and competition use. Ball Joints & Tie Rod Ends - are covered by a 3 Year/60000km Warranty.
Calculated at Checkout, shipping estimates are available from the cart