StopTech STR660 brake fluid is a high performance synthetic DOT4 fluid engineered to optimize brake system performance at high operating temperatures. In addition to guarding against boiling and subsequent brake fade, StopTech brake fluid maintains it's excellent viscosity, lubricity and non-compressibility.
StopTech STR-660 Brake Fluid Specs:
Typical Dry Boiling Point 622 Degrees F (312 Degrees C)
Typical Wet Boiling Point 404 Degrees F (206 Degrees C).
Minimum Wet Boiling Point 383 Degrees F (195 Degrees C).
Conforms to and exceeds U.S. FMVSS 116 (§ 571.116)
StopTech STR 660 Brake Fluid Compatibility: STR 660 fluid is compatible with modern ABS and other vehicle dynamic control systems. StopTech brake fluid is mixable with all DOT 3 and 4 products but should not be used in vehicles with mineral oil systems. Not to be used in brake systems using magnesium components.
StopTech STR 660 Brake Fluid Manufacturing: StopTech Brake Fluid is made in the UK and comes bottled in a special metal container that is not only extremely durable, but also gives the fluid up to 25 percent longer shelf life than typical plastic bottles provide.
StopTech STR660 Brake Fluid Install: Flushing/bleeding your brake system with StopTech STR-660 Brake Fluid typically takes about an hour. Please observe all safety precautions and follow proper installation guidelines while working on your vehicle. A power bleeder and catch can for old fluid is recommended. Most brake fluid will damage paint, if fluid comes into contact with painted surfaces wash off immediately!
Brake Fluid Shipping: Due to FAA regulations brake fluid is not able to be shipped via air freight and must be sent with ground shipping.